Rim Nam Foods' market fact sheet ended with a clear decision: stop relying on one carton converter, award 80/20, and qualify a second source. The tender goes out in three months. The buyer opens a blank spreadsheet and realises she can name four converters, and two of them are distributors.
Second-source projects stall right here. The tender date arrives, the only qualified supplier is the incumbent, and "dual sourcing" becomes a line in next year's plan again.
Supplier qualification is the work that prevents that. It's a funnel that takes you from a wide list of possible suppliers to a short list you'd be happy to award business to, before the tender opens. It answers three questions in turn: who could supply this, who is worth a closer look, and who has proven they can actually do it. This post sits between supply market analysis and RFP design in the series. The market analysis tells you where to look; qualification decides who gets the RFP.
Supplier qualification funnel: long list, RFI, screen, financial check, first visit and trial, ending in an approved supplier list before the RFP
What Is Supplier Qualification?
Supplier qualification is the process of checking that a potential supplier can meet your requirements on quality, capacity, financial stability and compliance before you invite them to bid. It usually starts with a supplier scan, a structured search for every credible source, and ends with the supplier on your approved list.
I run it as a six-stage funnel:
- Long list. Everyone who might plausibly supply the category.
- Request for information. A short questionnaire to learn who they are and what they can do.
- Screen. Knock-out criteria first, then a simple score.
- Financial check. Can they survive the contract?
- First visit. Do the answers match what you see?
- Trial and approval. Does their product work on your line?
Each stage costs more time than the one before, for you and for the supplier. That's the point of the funnel: spend a little effort on many suppliers early and a lot on a few later.
Timing matters. In BSI's October 2026 study of more than 1,400 managers, more than half said they mostly react to supply risk after the event, and a third were searching for new supplier networks. Qualifying a supplier in a hurry, after the incumbent has failed, is the expensive way to do it.
Step 1: Build a Long List
Start wide. The market fact sheet already tells you how far the market reaches; now find every supplier inside that boundary. Good places to look:
- Your own data. Past bidders, suppliers to other sites in your group, and suppliers of related categories.
- Your incumbents. Ask them who they see as their main competitors and how those competitors differ. Most will tell you.
- Industry associations and trade fairs. Member lists are often the best way to find smaller, specialist suppliers that never appear in search results.
- Customs and trade data. Exporters of the product in neighbouring countries are possible sources too.
- Non-traditional suppliers. Companies that make something close to what you need for a different industry.
Check that each name is a manufacturer, not a distributor or trading company. Distributors have a place, but you can't qualify a factory you'll never see. Keep a one-page profile for each supplier (ownership, plants, capacity, main customers, certifications) in one shared place, so the whole category team works from the same facts.
Step 2: Send a Short Request for Information
A request for information (RFI) is a questionnaire, not a tender. I describe it as a way to gather written information on what vendors can offer, and is clear that an RFI doesn't buy anything and nothing in the replies can become a contract. Don't ask for prices. Suppliers will either guess or anchor high, and you'll have shown your hand before the RFP.
Ask for what the screening needs, and no more:
- Legal entity, ownership and plant locations
- Capacity, current utilisation and the lines that would run your product
- Certifications and food-contact compliance
- Main customers and industries served, with references
- Lead times, delivery area and contingency arrangements
- Latest audited financial statements, or permission to check them
- What makes them different from their competitors
That last question is more revealing than it looks. A supplier that can't answer it usually competes on price alone.
Keep it to two or three pages, give a firm deadline, and call each supplier before you send it. A short introduction gets far more replies than a cold email, especially from smaller family-owned firms. A supplier that doesn't reply on time has told you something about its service.
Step 3: Screen With Knock-Outs, Then Score
Screen in two passes. First, apply the knock-outs, the conditions a supplier must meet to stay in at all. For Rim Nam's cartons:
- Food-contact compliance. A recognised certification such as the BRCGS Global Standard for Packaging Materials, which covers product safety, quality and legal requirements for packaging manufacturers, or an equivalent your customers accept.
- Capacity. Enough spare capacity for your volume without you becoming too large a share of their business.
- Delivery reach. Within trucking distance of your plant, with a realistic contingency.
- Financial health. No obvious risk of failure during the contract (Step 4).
- Ethics and labour. Willing to sign your supplier code of conduct and accept an audit.
Then score the suppliers who pass against the five drivers I use throughout the series: cost, quality, service, innovation and continuous improvement. Weight them for the category. Keep the score simple; its job is to rank a handful of suppliers for a visit, not to award the business.
On capacity, I like to keep our volume to a minority share of a new supplier's output. If you'd be half of their business, a problem at your end becomes a crisis at theirs, and you lose the option to walk away.
Step 4: Check Financial Health
A supplier that fails mid-contract costs far more than a slightly higher price. For Thai companies, the Department of Business Development's DBD DataWarehouse gives free access to company registration details, directors, shareholders, and balance sheets and profit and loss statements, partly in English. Look at three years, not one:
- Liquidity. Can they pay their bills? Watch current assets against current liabilities.
- Debt. How much are they carrying, and is it growing?
- Profitability. Is the business making money, and is the trend steady?
- Filing discipline. Late or missing filings are a warning sign in themselves.
If you want a single screening number, Edward Altman's Z-score combines liquidity, retained earnings, profitability, leverage and asset turnover into one distress indicator. Altman published a version adapted for private companies, using book value instead of market value. Treat it as a flag for a closer look, not a verdict, and remember that commercial database figures for private firms are sometimes self-reported.
Step 5: Make a First Visit
The RFI tells you what a supplier says. A visit tells you whether it's true. Use a lighter version of the supplier site visit from earlier in the series: walk the line that would run your product, check the quality lab and test records, look at hygiene and housekeeping, and confirm the capacity claim against what's actually running.
Take quality with you. They'll be the ones approving the product, and their sign-off later will be faster if they've seen the plant.
Step 6: Run a Trial and Approve
A supplier is only qualified when its product works in your operation. For cartons, that means sample cartons tested for strength, a run on your own packing line, and print checked against your artwork. Agree the test plan and pass criteria with quality and production before the samples arrive, so nobody argues about the result afterwards.
Once the trial passes, add the supplier to your approved supplier list. Record the approval date, the scope (which specifications, which sites) and when it should be reviewed. Only then does it go on the RFP invitation list.
Allow time. Between the RFI, visits and trials, qualification can easily take two to three months. That's why it starts as soon as the market analysis says you need another source, not when the RFP is ready to go.
What Did Rim Nam's Qualification Funnel Show?
Rim Nam ran the funnel over ten weeks (illustrative figures):
| Stage | Suppliers | What filtered them out |
| Long list | 14 | Three were distributors; removed |
| RFI sent | 11 | Two didn't reply by the deadline |
| Passed knock-outs | 5 | Four lacked a recognised food-contact certification |
| Passed financial check | 4 | One had filed late two years running, with rising debt |
| First visit | 3 | The fourth couldn't spare capacity on a suitable line |
| Passed trial | 2 | One failed the compression test on the first run |
Two converters qualified alongside the incumbent, so the RFP went to three suppliers instead of one. One of the two was a converter that mainly supplies the electronics industry and hadn't appeared on Rim Nam's original list at all.
Back to the blank spreadsheet. The buyer who starts qualifying when the tender is due ends up inviting the incumbent and two names from a quick search, and awards to the incumbent again. The buyer who started three months earlier sends the RFP to three qualified suppliers, and the 80/20 split is real from the first order.
Remember we follow Rim Nam Foods, a made-up curry maker outside Bangkok
I'm not good with Graphic Design, all the images are AI generated.